- Products and Solutions
- Components
- Input Systems
- Solutions
- Railway Technology
- Distribution
- Markets
- Competences
- Engineering
- Manufacturing
- Supply Chain Management
- Qualification and Testing
- Services
- Info Center
- Product Conformity
- Support Tools
- Help Center
- About us
- Company
- Careers
- Contact
Search
- General Product Information
Mating Appliance Couplers
On this page
Suitable appliance couplers according to IEC 60320-1
The suitable connection options for appliance couplers are listed below. The appliance couplers’ contours are coded (type, symbol) so as to allow a ‘hot condition’ connector to fit into a ‘cold condition’ appliance inlet, but not vice versa. Important note: The appliance inlet nominal current rating must be at least identical to that of the appliance!
Combinations according to IEC 60320-1: • intended, □ possible The available product combinations can be selected under ‘ ’.
Suitable Interconnection Couplers according to IEC 60320-2-2
The suitable connection options for interconnection couplers are listed below. The regulatory framework applicable here is identical to that governing .
Combinations according to IEC 60320-1: • intended, □ possible
The available product combinations can be selected under ‘ ’.
Combinations according to IEC 60320-2-2: • intended, □ possible
Contact Configuration
On standard, non-reversible appliance inlets/outlets, the contacts, when viewing the engagement surfaces from above, must be configured as follows:
You will be transferred to the selected country page address. Therefore you will leave the SCHURTER main page.