6004.0215 EU Power Supply Cord with IEC Connector C13, straight

Part: 6004.0215

Config. Code: 6004.0215

Designation: EU cordset C13 2.5m angled

Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black

... loading ...

Connectors (Inlets/Outlets)

C13

70° C

CEE 7 / VII
Connector Logo

Approvals and Compliances

CAD

Description

1 Function:
Power Cord, Protection class I
Pin temperature 70 °C
custom specific versions on request

Detailed request for product

Details 6004.0215

Technical Data

Approvals and Compliances

CAD-Drawings

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 50 Hz

Allowable Operation Temperature

-40 °C to 70 °C

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects.
Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric shock

Protection Class

Class I: with ground; Class II: without ground

Detailed information relating to protection class can also be found in the general product information
Protection against electric shock

Suitable for appliances with protection class I acc. to IEC 61140

Material: Housing

PVC, black

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42

Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C13 acc. to
(for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type:

Approval Logo	Certificates	Certification Body	Description
	VDE Approvals	VDE	VDE Certificate Number:

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	BS 1363-1	Socket-outlets, adapters and connection units

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Designed for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.

Short Table of Variants 6004.0215 Open complete table 6004.0215

Connector		Cable				Order Number Variant Details The link on the respective order number refers to a separat tab with specific detailed information . This assures better readable information of the selected product. Change to the tab All Products in order to show details of another variant. This approach offers to use generic alias link to the product details: www.schurter.xx/art/ [Order Number] where the following variables are used: - xx is the country specific domain - [Order Number]	A=Most Popular A=Most Popular Most popular products have the following customer benefits: - previously ordered by multiple customers - generally in stock for immediate delivery - early adoption or mature life cycle Contact us for availability on other product variants, lead-times vary: Contact-Form Availability for all products can be searched real-time. Enter part number and required quantity: Stock Check SCHURTER	...
Type	V-Lock	Cord Type	Conductor cross section	Length [m]	Color

C13		H05VV-F3G1.0	3 x 1 mm²	2.5	black	6004.0215	A	...
█ Most Popular.

Packaging unit

40 Pcs

Table of Variants 6004.0215

Connector		Cable				Plug					Order Number Variant Details The link on the respective order number refers to a separat tab with specific detailed information . This assures better readable information of the selected product. Change to the tab All Products in order to show details of another variant. This approach offers to use generic alias link to the product details: www.schurter.xx/art/ [Order Number] where the following variables are used: - xx is the country specific domain - [Order Number]	A=Most Popular A=Most Popular Most popular products have the following customer benefits: - previously ordered by multiple customers - generally in stock for immediate delivery - early adoption or mature life cycle Contact us for availability on other product variants, lead-times vary: Contact-Form Availability for all products can be searched real-time. Enter part number and required quantity: Stock Check SCHURTER	MOQ MOQ Minimum order quantity. It is necessary to meet the MOQ when placing orders. Please contact us for assistance: Contact-Form	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact-Form
Type	V-Lock	Cord Type	Conductor cross section	Length [m]	Color	Type	Country	Standard	Style

C13		H05VV-F3G1.0	3 x 1 mm²	2.5	black	Europlug	EU	CEE 7 / VII	angled	-	6004.0215	A	40	40
█ Most Popular.

Packaging unit

40 Pcs

References / Document Downloads

Mating Components 6004.0215

Mating Inlets/Plugs (88)

[Swipe to the left and right for more options]

6100-3

6100-3, Mounting: Screw, Solder / Quick Connect, Appliance Inlet: IEC C14

6100-4

6100-4, Mounting: Snap-in, Solder / Quick Connect, Appliance Inlet: IEC C14

6102-3

6100-9, SGE GST, PG07, Gerätesteckerkombielement 10A Frontplatte

6102-3, Mounting: Screw, Solder / Quick Connect, Appliance Inlet: IEC C18

6102-5

6102-5, Mounting: Snap-in, Solder / Quick Connect, Appliance Inlet: IEC C18

6130

6130, Mounting: Snap-in, Appliance Inlet, IEC C14, For PCB mounting, IP30, Meets the glow wire test acc. IEC 60335-1 edition 4, 7/7.3, Suitable for appliances with protection class I

6150

Gerätestecker, SGE GST, PG05, Einzelelem zu Kombielement Leiterplatte Felcom

G-Stecker, Mounting: Appliance Inlet : IEC C14 Without fuse holder

1061

1061, Mounting: Snap-in, Solder / Quick Connect / Screw Terminals, Appliance Inlet: IEC C14

6010

6010, Mounting: Snap-in, Solder / quick-connect / screw / PCB, Appliance Inlet: IEC C14

6015

6015, Mounting: Snap-in, Solder / quick-connect / screw / PCB, Appliance Inlet: IEC C18

0711

0711, Mounting: Snap-in, 0.8 mm, Solder, Appliance Inlet: IEC C14

6048

6048, Mounting: Screw, Appliance Inlet: IEC C14

6061

6061, Mounting: Screw, Appliance Inlet: IEC C14

6061-G

6061, SGE GST, PG07, Gerätestecker 10A Frontplatte

6061-G, Mounting: Screw, Appliance Inlet: IEC C14

8843.ZP30

8843.ZP30, Mounting: Screw, For PCB mounting, Appliance Inlet: IEC C14

GSP1

GSP1, Mounting: Screw, Appliance Inlet, IEC C14, For PCB mounting, IP40, Quick connect terminals 4.8 x 0.8 mm angled or straight, Suitable for appliances with protection class I or II

GSP2

GSP2, Mounting: Sandwich, Appliance Inlet, IEC C14, For PCB mounting, IP40, Quick connect or solder terminals, angled or straight, Suitable for appliances with protection class I or II

0712

0712-PQ, Mounting: Snap-in, Front Side, Solder terminal (4.8 x 0.8 mm), 1x Appliance Outlet: IEC F

4741

4741, Mounting: 2x Appliance Outlet: IEC F

4747

4747, Mounting: 4x Appliance Outlet: IEC F

4740

4740, Mounting: 6x Appliance Outlet: IEC F

5123

5123, Mounting: Screw, Front-/Rear-Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Themoplast / steel tin-plated Appliance Inlet: IEC C14, Suitable for appliances with protection class I or II

GRF2

GRF2, Mounting: Rear Side, With EMC-shield and without line filter, 10 A, Plug Connector, Appliance Inlet: IEC C14, Suitable for appliances with protection class I

5110

5110, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Thermoplastic Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I

5120

5120, Mounting: Screw with plastic flange, Front-/Rear-Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Themoplast / steel tin-plated Appliance Inlet: IEC C14, Suitable for appliances with protection class I or II

KFS

KFS, SGE GST, PG06, Kombielement Frontplatte 10A mit Filter

KFS, Mounting: Screw, Front Side, Filter: Standard version, Without fuse holder: 10 A, Appliance Inlet: IEC C14, prewired

4732

4732, Mounting: Power Cord, Plug: IEC E, Cable

4735

4735, Mounting: Power Cord, Plug: IEC E, Cable

4733

4733, Mounting: Power Cord, Plug: IEC E, Cable

4736

4736, Mounting: Power Cord, Plug: IEC E, Cable

P685

p685, Mounting: Power Cord, Plug: IEC E, Cable

DF11

DF11, Mounting: Screw, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals 6.3 x 0.8 mm, Appliance Inlet: IEC C14, Without fuse holder: Suitable for appliances with protection class I or II 0 DF11, Mounting:Screw, Quick connect terminals 6.3 x 0.8 mm, Without fuse holder: Rocker switch, non-illuminated or illuminated, 2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I or II 0 DF11, Power Entry ModuleC14, 55°C, version: L: N: ground: : fuseholder: color: design: dimension S: features: 0 DF11, Mounting: Snap-in/screw-on, Appliance Inlet: IEC C14, Without fuse holder: : black, Suitable for appliances with protection class I or II 0 DF11, Mounting: Snap-in/screw-on8 mm, Quick connect terminals 6.3 x 0.8 mm, IP40,: black, Appliance Inlet: IEC C14, Circuit Breakers TA45, A, non-illuminated, Protection Class I or II 0 DF11, Mounting: Snap-in/screw-on, mm, Without fuse holder: : IEC Suitable for appliances with protection class I or II 0

DD11

DD11, Mounting: Screw-on mounting, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals 4.8 x 0.8 mm, Appliance Inlet: IEC C14, With or without protection cover, Fuseholder: 1-/2-pole, Suitable for appliances with protection class I

DD21

DD21, Mounting: Screw-on mounting Rear Side, Rocker switch: non-illuminated or illuminated 2-pole, additional quick connect 4.8 x 0.8 mm Appliance Inlet: IEC C14, Fuseholder: 1-/2-pole

DC11

DC11, Mounting: Screw, Rocker switch: non-illuminated or illuminated 1-/2-pole, Quick connect terminals 4.8 x 0.8 mm, Appliance Inlet: IEC C14, Without fuse holder: Suitable for appliances with protection class I or II

KEB2

KEB2, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Without fuse holder: Rocker switch, non-illuminated or illuminated, 2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I

DC21

DC21, Mounting: Screw Rear Side, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals 4.8 x 0.8 mm Appliance Inlet: IEC C14, Without fuse holder:

KM, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w

KM, Mounting:Quick connect terminals 4.8 x 0.8 mm, Fuseholder: 1-/2-pole, Rocker switch, non-illuminated, 2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I or II

KD, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w

KD, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Voltage Selector: 2-4 digits, Fuseholder: 1-/2-pole, Rocker switch, non-illuminated, 2-pole, V-Lock cord retaining, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I

KG, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter

KG, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Voltage Selector: Fuseholder: 1-/2-pole, Rocker switch, non-illuminated, 2-pole, Appliance Inlet: IEC C14, 250 VAC, partially wired, Suitable for appliances with protection class I

6765

6765, Power Entry ModuleC14, 70°C, version: L: N: ground: : fuseholder: color: design: dimension S: features:

6762

6762, Power Entry ModuleC14, 70°C, version: L: N: ground: : fuseholder: color: design: dimension S: features:

6135

6135, Mounting:Quick connect terminals 6.3 x 0.8 mm, Without fuse holder: 2-pole, Appliance Inlet: IEC C14, 250 VAC, unwired, Suitable for appliances with protection class I

6145

6145, Mounting: Screw6 mm, Quick connect terminals 6.3 x 0.8 mm, IP40,: black, Appliance Inlet: IEC C14, Circuit Breakers TA45, 10A, non-illuminated or illuminated, Protection Class I

KP (Outlet)

KP (Dose), SGE GST, PG05, Kombielement Leiterplatte 10A ohne Filter

IEC Appliance Inlet C14 with Appliance Outlet F

KP (Switch)

KP01 (Sicherungshalter), SGE GST, PG05, Kombielement Leiterplatte 10A ohne Filter

, Mounting: Screw, mm, : 2-pole, : IEC C14,

KP (FH)

KP (SiHa), SGE GST, PG05, Kombielement Leiterplatte 10A ohne Filter

KP (SiHa), Mounting: mm, Fuseholder: 1-/2-pole, Appliance Inlet: IEC C14, Quick connect terminals 4.8 x 0.8 mm

Felcom 64

Felcom 64, Mounting: 0 mm, Fuseholder: Solder terminals 3.5 x 0.8 mm / quick connect terminals 6.3 x 0.8 mm, Rocker switch: 2-pole non-illuminated, Appliance Inlet: IEC C14, Power Entry Module

6250 / 6255

Sicherungshalter, SGE GST, PG05, Einzelelem zu Kombielement Leiterplatte Felcom s/w

Si-Ha, Mounting: Appliance Inlet : IEC C14 Fuseholder 1-/2-pole

GSF1

GSF1, Mounting: Fuse holder: optional, 1 or 2 pole, Appliance Inlet: IEC C14, Suitable for appliances with protection class I

GSF2

GSF2, Mounting: Snap-in, Appliance Inlet: IEC C14, Fuseholder: 1-/2-pole, Solder / Quick Connect : black, Suitable for appliances with protection class I or II

KEA

KEA, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w

KEA, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Voltage Selector: 2-4 digits, Fuseholder: 1-/2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired or unwired, Suitable for appliances with protection class I

KEA-Print

KEA-Print, Mounting: Screw, Front-/Rear-Side, Fuse holder: 1 or 2 pole, Appliance Inlet: IEC C14, Suitable for appliances with protection class I

6200

6200, Mounting:Screw, Solder / Quick Connect, Fuseholder: 1-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I

6202

6202, Mounting:Screw, Solder / Quick Connect, Fuseholder: 1-pole, Appliance Inlet: IEC C18, 250 VAC, prewired, Suitable for appliances with protection class II

6205

6205, Mounting:Screw, Solder / Quick Connect, Fuseholder: 1-pole, Appliance Inlet: IEC C14, 250 VAC, unwired, Suitable for appliances with protection class I

1062

1062, Power Entry ModuleC14, 70°C, version: L: N: ground: : fuseholder: color: design: dimension S: features:

1064

1064, Power Entry ModuleC14, 70°C, version: L: N: ground: : fuseholder: color: design: dimension S: features:

6220

6220, Mounting:Screw, Solder / Quick Connect, Fuseholder: 2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I

4707

4707, Mounting:Screw, Solder / Quick Connect, Fuseholder: 1-/2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I or II

8843-2 SP

8842/8843, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w

8843-2 SP, Mounting: Screw, Appliance Inlet: IEC C14, Fuseholder: 1-/2-pole, : black, Suitable for appliances with protection class I

KEC

KEC, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w

KEC, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Voltage Selector: 2-4 digits, Fuseholder: 1-/2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired or unwired, Suitable for appliances with protection class I

KE, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter

KE, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Voltage Selector: Fuseholder: 1-/2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired or unwired, Suitable for appliances with protection class I

DG12

DG12, Mounting : Screw, 8 mm, 15 A, prewired, Standard and Medical Version, Appliance Inlet: IEC C14 C18, Circuit Breakers TA35: DG12, Suitable for appliances with protection class I or II

DD14

DD14, Mounting: Screw-on mounting, Front Side, Filter, Standard and Medical Version, Fuseholder:1-/2-pole, 10 A, Rocker switch: 2-pole, non-illuminated Appliance Inlet: IEC C14, prewired

KFB1

KFB1, Mounting: Screw, Front Side, Filter: Standard version, Without fuse holder: 10 A, Rocker switch: 1-pole, Appliance Inlet: IEC C14, prewired

DA22

DA22 Mounting: Screw-on mounting, Rear Side, PCB, 10 A, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Appliance Inlet: IEC C14, Suitable for appliances with protection class I

KFB2

KFB2, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Rocker switch: 2-pole, Appliance Inlet: IEC C14, prewired

DC12

DC12, Mounting: Screw, Front-/Rear-Side, Filter, Standard and Medical Version, Without fuse holder:10 A, Rocker switch: 1-/2-pole, non-illuminated or illuminated Appliance Inlet: IEC C14, prewired

DC22

DC22 Mounting: Screw, Rear Side, PCB, 10 A, Filter: Standard and Medical Version, Without fuse holder: Rocker switch: 1-/2-pole, non-illuminated or illuminated, Appliance Inlet: IEC C14, Suitable for appliances with protection class I

DD12

DD12, Mounting: Screw-on mounting, Front Side, Filter, Standard and Medical Version, Fuseholder:1-/2-pole, 10 A, Rocker switch: 2-pole, non-illuminated Appliance Inlet: IEC C14, prewired

DD22

DD22 Mounting: Screw-on mounting, Rear Side, PCB, 10 A, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Rocker switch: 2-pole, non-illuminated, Appliance Inlet: IEC C14, Suitable for appliances with protection class I

KMF

KMF, SGE GST, PG06, Kombielement Frontplatte 10A mit Filter

KMF, Mounting: Front Side, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Front Side, 10 A, 2-pole, Appliance Inlet: IEC C14, prewired

CD, SGE GST, PG06, Kombielement Frontplatte 10A mit Filter

CD, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Front Side, 10 A, 2-pole, Voltage Selector: step, 2-4 digits, Appliance Inlet: IEC C14, prewired

CG, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Front Side, 10 A, 2-pole, Voltage Selector: series-parallel, Appliance Inlet: IEC C14, partially wired

FKH

FKH, Mounting: Screw, Front Side, Filter: Standard version, Fuseholder: 1-pole, Front Side, 10 A, 2-pole, Thermoplastic Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I

FKI

FKI, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Fuseholder: 2-pole, Front Side, 10 A, 2-pole, Thermoplastic Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I

FKHD

FKHD, Mounting: Screw, Front Side, Filter: Standard version, Fuseholder: 1-pole, Front Side, 10 A, 2-pole, Thermoplastic Appliance Inlet: IEC C14, Suitable for appliances with protection class I

FKID

FKID, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Fuseholder: 2-pole, Front Side, 10 A, 2-pole, Thermoplastic Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I

DF12

DF12, Mounting : Screw, 8 mm, 15 A, prewired, Standard and Medical Version, Appliance Inlet: IEC C14 Circuit Breakers TA45: Suitable for appliances with protection class I

Felcom 54

Felcom 54, Mounting: mm, Front Side, Filter: Standard version, Fuseholder: 1-/2-pole, Front Side, 10 A, Rocker switch: 2-pole, Solder terminals 3.5 x 0.8 mm / quick connect terminals 6.3 x 0.8 mm, Appliance Inlet: IEC C14

5145

5145, Mounting : Screw, 8 mm, 15 A, prewired, Standard and Medical Version, Appliance Inlet: IEC C14 or C18, Circuit Breakers TA45: 5145, Suitable for appliances with protection class I or II

GRF4

GRF4, Mounting: Screw, Rear Side, With EMC-shield and line filter, Standard and Medical Version, 10 A, Appliance Inlet: IEC C14, Suitable for appliances with protection class I

KFA

KFA, SGE GST, PG06, Kombielement Frontplatte 10A mit Filter

KFA, Mounting: Screw, Front-/Rear-Side, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Front Side, 10 A, Voltage Selector: step, 3 pos., Appliance Inlet: IEC C14, prewired

KFC

KFC, SGE GST, PG06, Kombielement Frontplatte 10A mit Filter

KFC, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Front Side, 10 A, Voltage Selector: step, 3 pos., Appliance Inlet: IEC C14, prewired

5200

5200, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Fuseholder: 1-pole, Front Side, 10 A, Thermoplastic Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I

5220

5220, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Fuseholder: 2-pole, Front Side, 10 A, Thermoplastic Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I

5707

5707, Mounting: Screw, Front-/Rear-Side, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Front Side, 8 A, Appliance Inlet: IEC C14, Suitable for appliances with protection class I or II

CE, SGE GST, PG06, Kombielement Frontplatte 10A mit Filter

CE, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Fuseholder: 1-/2-pole, Front Side, 10 A, Voltage Selector: series-parallel, Appliance Inlet: IEC C14, partially wired

Mating Inlets/Plugs shuttered (1)