Screw-on with IP67 and IP54 cord connection

Screw-on with IP67

Screw-on A

Screw-on B

Series

DG12

IEC Appliance Inlet C14 or C18 with Filter, Circuit Breaker TA35 2-pole

21 Variants

Connectors (Inlets/Outlets)

C14

70° C

C18

70° C

Approvals and Compliances

Description

Panel mount: Screw-on or snap-in mounting front side
3 Functions: Appliance Inlet protection class I or II, Circuit breaker type TA35 2-pole, Line filter in standard and medical version
Quick connect terminals 6.3 x 0.8 mm

Unique Selling Proposition

With sealing: IP54 under load, IP67 towards housing
Recessed rocker switch
Various mounting options
V-Lock cord retaining

Characteristics

All single elements are already wired
Circuit Breaker non-illuminated or illuminated
Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP)
For applications according IEC/UL 62368-1 we recommend variants with bleed resistor

Other versions on request

Other rocker marking
Medical Version (M80)
Capacitance CX1
Filter version with high inductance

Detailed request for product

Inlet Connector C14 / C18 also available without seal. The V-Lock cord latching system prevents against accidental removal of the power supply and allows IP54 under load.

Details DG12

Technical Data

Approvals and Compliances

Dimension

Electrical Data

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

1 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz

Leakage Current

The leakage current is an electric current flowing in an undesirable current path.
In EMC filters this is done by the applied Y-capacitors, which are used for noise suppression. Information on the amount and classification of leakage currents are explained in detail and are listed in the data sheets.
Leakage Current

standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)

Allowable Operation Temperature

-25 °C to 60 °C

Climatic Category

Disposition of components in categories for the assessment of mechanical and electrical properties.
Climatic Category

25/060/21 acc. to IEC 60068-1

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

Front Side IP40 / IP65 / IP67 acc. to IEC 60529

Protection Class

Class I: with ground; Class II: without ground

Detailed information relating to protection class can also be found in the general product information
Protection against electric shock

Suitable for appliances with protection class I or II acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S

See details in drawing
Snapper

Screw: max 8 mm
Mounting screw torque max 0.5 Nm
: S =1.0/1.2/1.5/2.0/2.5/3.0 mm

Material

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C14 C18 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II

Circuit Breakers

Circuit Breaker

Circuit Breakers type and amount of switched poles
Details of Circuit Breakers can be found in the catalog or in the general product information
Circuit Breaker

Acc. IEC/EN 60934, UL 1077, CSA 22.2 no. 235
2-pole rocker switch, illuminated or non-illuminated.

Line Filter

Filter Type

Filter classification according leakage current for easy reading:
Standard: < 0.5 mA
Medizinal: < 0.1 mA
Leakage Current

Standard and Medical Version, IEC 60939, UL 60939-3, CSA C22.2 no. 8
Technical Details

MTBF

The term MTBF is the English acronym Mean Time Between Failure and describes reliability of a component. The operating time of a system can be calculated based on thementioned value of the component. - The higher this value, the more reliable the component.
MTBF

> 100'000 h acc. to MIL-HB-217 F

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: DG12

Certificates	Certification Body	Description
VDE Approvals	VDE	Certificate Number: 40049092
UL Approvals	UL	UR File Number: E495089
CQC Approvals	CQC	CQC Certificate Number: CQC19001233482
KTL Approvals	KTL	Korea Testing Laboratory

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	IEC 60939	Passive filters for suppressing electromagnetic interference
Designed according to	IEC 61058-1	Switches for appliances. Part 1. General requirements
Designed according to	UL 60320-1	Standard for Attachment Plugs and Receptacles
Designed according to	UL 60939-3	Passive filters for suppressing electromagnetic interference
Designed according to	CSA C22.2 no. 60320-1	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to	CSA C22.2 no. 8	Electromagnetic interference (EMI) filters

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements
	Suitable for applications acc.	IEC 60601-1	Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
	SCHURTER AG	V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
Medical Equipment	SCHURTER AG	Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP)

Dimensions [mm]

	Snap-in version IP40

	Screw-on A

	Screw-on B

	Screw-on with IP67

Diagrams

	Standard Version, medical Version M80

	1) Line, 2) Load

	Medical version M5, protection class I

	1) Line, 2) Load

	Medicalversion (M5), Protection Class II

	1) Line 2) Load

Technical Data of Filter-Components

Rated Current [A]	Filter-Type	Inductances L [mH]	Capacitance CX [nF]	Capacitance CY [nF]	R [MΩ]
1	Standard version	2 x 12	220	2.2	1
2	Standard version	2 x 5.2	220	2.2	1
3	Standard version	2 x 4	220	2.2	1
4	Standard version	2 x 2	220	2.2	1
6	Standard version	2 x 0.8	220	2.2	1
8	Standard version	2 x 0.6	220	2.2	1
10	Standard version	2 x 0.4	220	2.2	1
15	Standard version	2 x 0.1	220	2.2	1
10	Standard version with high inductance	2 x 0.65	220	2.2	1
15	Standard version with high inductance	2 x 0.2	220	2.2	1
6	Medical Version (M5)	2 x 0.4	220	2.2	1
10	Medical Version (M5)	2 x 0.4	220	-	1
15	Medical Version (M5)	2 x 0.1	220	-	1
10	Medical version (M5) with high inductance	2 x 0.65	220	-	1
15	Medical version (M5) with high inductance	2 x 0.2	220	-	1
4	Medical version (M80) with high inductance	2 x 3.4	220	0.47	1

Attenuation Loss

Standard version

	1 A

	2 A

	3 A

	4 A

	6 A

	8 A

	10 A

	15 A

Medical version (M5)

	1 A

	2 A

	3 A

	4 A

	6 A

	8 A

	10 A

	15 A

Time-Current-Curves

	Tripping Characteristics thermal In < 3 A
Time in Seconds
	Multiple of Rated Current In Ambient temperature +23°

	Tripping Characteristics thermal In ≥ 3 ... ≤ 15 A
Time in Seconds
	Multiple of Rated Current In Ambient temperature +23°

Effect of ambient temperature

Ambient Temperature [°C]	Correction factor
-30	0.76
-20	0.81
0	0.90
+23	1.00
+40	1.03
+50	1.04
+60	1.06

Order number key DG12

Short Table of Variants DG12 Open complete table DG12

Circuit Breaker				...
Rated Current [A]	Rocker colour	Illumination	Order Number

1	black	non-illuminated	3-108-854	...
10	white	non-illuminated	3-109-572	...
10	white	non-illuminated	3-109-575	...
10	white	non-illuminated	3-109-698	...
10	white	non-illuminated	3-118-974	...
10	white	non-illuminated	3-141-342	...
15	white	non-illuminated	3-109-573	...
2	white	non-illuminated	3-109-557	...
3	white	non-illuminated	3-109-558	...
4	black	non-illuminated	3-109-559	...
6	white	non-illuminated	3-109-560	...
8	white	non-illuminated	3-109-561	...
10	white	non-illuminated	3-109-602	...
15	white	non-illuminated	3-109-603	...
10	white	non-illuminated	3-108-465	...
10	white	non-illuminated	3-118-982	...
15	white	non-illuminated	3-109-588	...
6	white	non-illuminated	3-141-343	...
10	white	non-illuminated	3-109-606	...
15	white	non-illuminated	3-109-607	...
4	black	non-illuminated	3-147-992	...

Packaging unit

10 Pcs

Table of Variants DG12

Circuit Breaker			Filter		Connector							PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form
Rated Current [A]	Rocker colour	Illumination	Rated Current [A]	Filter Type	Protection Class	Color	Mounting	IP-Protection		Config. Code	Order Number

1	black	non-illuminated	1	Standard version	I	black	Screw-on A	IP40		DG12-CBDBLJ10C0-000-C6135-120-1000-00	3-108-854	10
10	white	non-illuminated	10	Standard version	I	black	Screw-on A	IP40	•	DG12-CBDWM100C0-000-C6135-720-1000-00	3-109-572	10
10	white	non-illuminated	10	Standard version	I	black	Snap-in 1.5	IP40		DG12-CBDWM100C0-000-C6135-720-1150-00	3-109-575	10
10	white	non-illuminated	10	Standard version	I	black	Screw-on B	IP40		DG12-CBDWM100C0-000-C6135-720-1010-00	3-109-698	10
10	white	non-illuminated	10	Standard version	I	black	Screw IP67	IP67 / IP54		DG12-CBDWM100C0-000-C6135-720-1880-00	3-118-974	10
10	white	non-illuminated	10	Standard version	I	white	Screw IP67	IP67 / IP54		DG12-CBDWM100C0-000-C6135-720-1881-00	3-141-342	10
15	white	non-illuminated	15	Standard version	I	black	Screw-on A	IP40	•	DG12-CBDWM150C0-000-C6135-820-1000-00	3-109-573	10
2	white	non-illuminated	2	Standard version	I	black	Screw-on A	IP40		DG12-CBDWMJ20C0-000-C6135-220-1000-00	3-109-557	10
3	white	non-illuminated	3	Standard version	I	black	Screw-on A	IP40		DG12-CBDWM030C0-000-C6135-320-1000-00	3-109-558	10
4	black	non-illuminated	4	Standard version	I	black	Screw-on A	IP40		DG12-CBDBF040C0-000-C6135-420-1000-00	3-109-559	10
6	white	non-illuminated	6	Standard version	I	black	Screw-on A	IP40	•	DG12-CBDWM060C0-000-C6135-520-1000-00	3-109-560	10
8	white	non-illuminated	8	Standard version	I	black	Screw-on A	IP40		DG12-CBDWM080C0-000-C6135-620-1000-00	3-109-561	10
10	white	non-illuminated	10	Standard version with high inductance	I	black	Screw-on A	IP40		DG12-CBDWM100C0-000-C6135-721-1000-00	3-109-602	10
15	white	non-illuminated	15	Standard version with high inductance	I	black	Screw-on A	IP40		DG12-CBDWM150C0-000-C6135-821-1000-00	3-109-603	10
10	white	non-illuminated	10	Medical Version (M5)	I	black	Screw-on A	IP40		DG12-CBDWM100C0-000-C6135-750-1000-00	3-108-465	10
10	white	non-illuminated	10	Medical Version (M5)	I	black	Screw-on B	IP40		DG12-CBDWM100C0-000-C6135-750-1010-00	3-118-982	10
15	white	non-illuminated	15	Medical Version (M5)	I	black	Screw-on A	IP40		DG12-CBDWM150C0-000-C6135-850-1000-00	3-109-588	10
6	white	non-illuminated	6	Medical Version (M5)	II	white	Screw IP67	IP67 / IP54		DG12-CBDWF060C0-000-C6135-550-0881-00	3-141-343	10
10	white	non-illuminated	10	Medical version (M5) with high inductance	I	black	Screw-on A	IP40		DG12-CBDWM100C0-000-C6135-751-1000-00	3-109-606	10
15	white	non-illuminated	15	Medical version (M5) with high inductance	I	black	Screw-on A	IP40		DG12-CBDWM150C0-000-C6135-851-1000-00	3-109-607	10
4	black	non-illuminated	4	Medical version (M80) with high inductance	I	black	Screw IP67	IP67 / IP54		DG12-CBDBL040C0-000-C6135-471-1880-00	3-147-992	10

Packaging unit

10 Pcs

References / Document Downloads

References DG12

Alternative: version without line filter (1)

[Swipe to the left and right for more options]

DG11

Mating Components DG12

Mating Outlets/Connectors (8)

[Swipe to the left and right for more options]

4787

4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I

4788

4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I

5091

IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal

4782

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, Cable, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

Mating Outlets/Connectors shuttered (3)

[Swipe to the left and right for more options]

4783

4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

SC54C13KS

SC54C13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black

VAC13KS

VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black

Accessories DG12

Accessories (1)

[Swipe to the left and right for more options]

RC320

Various covers

RC320 Various covers	Rear cover IP40 version	3-125-673
RC320 Various covers	Rear cover IP67 version	3-125-674

28.08.2025

Transformation_Date:	2025-08-28 10:47:48
Export_Path:	/Datasheets/Datasheet_EMV_PG06_Export/KRAEHECH/DG12/2025_08_28/10_41_23_478_555028/
Export_Lang:	en
SGE_Name:	EMC Products
PG_Name:	Power Entry Modules with Line Filter
Typ_Name:	DG12
Typ_AliasNames:	:dg12:
Typ_ID:	110266
Typ_Hierarchie:	020060160000001608
Typ_EPIM_Order:	10
Typ_Titel:	IEC Appliance Inlet C14 or C18 with Filter, Circuit Breaker TA35 2-pole
PublPrgr_Name:	Power Entry Modules with Filter
PublPrgr_Shortcut:	PG06
Variant table:	Variantentabelle_DG12 (230846)

DG12

Description DG12

Description

Unique Selling Proposition

Characteristics

Other versions on request

Details DG12

Approvals

Product standards

Application standards

Compliances

Dimensions [mm]

Diagrams

Technical Data of Filter-Components

Attenuation Loss

Standard version

Medical version (M5)

Time-Current-Curves

Effect of ambient temperature

Order number key DG12

Short Table of Variants DG12 Open complete table DG12

References / Document Downloads

References DG12

Alternative: version without line filter (1)

Mating Components DG12

Mating Outlets/Connectors (8)

Mating Outlets/Connectors shuttered (3)

Accessories DG12

Accessories (1)