KEA IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole

Fuse holder "Fingergrip" with voltage selector

Series

KEA

IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole

39 Variants

Connectors (Inlets/Outlets)

C14

70° C

Approvals and Compliances

Description

Panel mount: Screw-on version from front or rear side, snap-in version front side
3 Functions: Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1 or 2 pole, with or without voltage selector (step switch)
V-Lock notch standard
Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.
Quick connect terminals 4.8 x 0.8 mm

Unique Selling Proposition

Very compact design
Components internally wired
Integrated voltage selector
V-Lock cord retaining

Characteristics

Available with or without internal connections
Plug removal necessary for fuse-link replacement
Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

With solder terminals
Fuse drawer with other voltage values
For protection class II

Detailed request for product

Details KEA

Technical Data

Approvals and Compliances

Dimension

Electrical Data

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

10 A / 250 VAC; 60 Hz

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 3 kVAC between L-N
> 4 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric shock

IP-Protection

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Quick connect terminals 4.8 x 0.8 mm

Panel Thickness S

See details in drawing
Snapper

Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C14 / C18 acc. to IEC 60320-1,
UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I

Fuseholder

1.) fuse holder does not include circuit breakers
2.) Details about fuse-links can be found in the catalog under
FusesDetailed information on the fuse holder and fuse drawers can be found in the general product information.
Fuse drawer

1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6,
for fuse-links 5 x 20 mm

Rated Power Acceptance @ Ta 23 °C

5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole

Power Acceptance @ Ta > 23°C

Admissible power acceptance at higher ambient temperature see derating curves

Voltage Selector

You can refer to different input voltages
Details about the voltage selector can also be found in the general product information
Voltage Selector

optional, step, 2-4 digits

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: KEA

Certificates	Certification Body	Description
VDE Approvals	VDE	Certificate Number: 40046508
UL Approvals	UL	UR File Number: E93617
CCC Approvals	CCC	CCC Certificate Number: 2017180204004083

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	IEC 60127-6	Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to	UL 498	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 42	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Design	Standard	Description
Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements
Suitable for applications acc.	IEC 60601-1	Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
Suitable for applications acc.	IEC 60335-1	Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
	SCHURTER AG	V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
White Paper Glow wire test	SCHURTER AG	Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.
Medical Equipment	SCHURTER AG	Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP)

Dimensions [mm]

	Screw-on mounting type KEA

	Snap-in mounting type KEA

Diagrams

	without conn. Voltage Selector 4-positions, 1-pole

	without conn. Voltage Selector 4-positions, 2-pole

	with internal connections Voltage Selector 3-positions, 1-pole

	with internal connections Voltage Selector 3-positions, 2-pole

	Voltage Selector 2 pos. 1-pole

	Voltage Selector 2 pos. 2-pole

	without voltage selector 1-pole

	without voltage selector 2-pole

Derating Curves

	1-pole
Admissible power acceptance in Watt
	Ambient air temperature Ta °C

	2-pole
Admissible power acceptance in Watt per pole
	Ambient air temperature Ta °C

Short Table of Variants KEA Open complete table KEA

Type	Panel mounting	Panel Thickness s [mm]	Order Number	...

KEA	Snap-in	1.5	4301.0522	...
KEA	Snap-in	2	4301.0523	...
KEA	Snap-in	2.5	4301.0524	...
KEA	Snap-in	1.5	4301.2022	...
KEA	Snap-in	2	4301.2023	...
KEA	Snap-in	2.5	4301.2024	...
KEA	Snap-in	1.5	4301.2142	...
KEA	Snap-in	2	4301.2143	...
KEA	Snap-in	1.5	4301.0022	...
KEA	Snap-in	2	4301.0023	...
KEA	Snap-in	2.5	4301.0024	...
KEA	Snap-in	1.5	4301.2062	...
KEA	Snap-in	2	4301.2063	...
KEA	Snap-in	2.5	4301.2064	...
KEA	Snap-in	1.5	4301.0502	...
KEA	Snap-in	2	4301.0503	...
KEA	Snap-in	2.5	4301.0504	...
KEA	Snap-in	1.5	4301.2002	...
KEA	Snap-in	2	4301.2003	...
KEA	Snap-in	2.5	4301.2004	...
KEA	Snap-in	1.5	4301.2122	...
KEA	Snap-in	2	4301.2123	...
KEA	Snap-in	2.5	4301.2124	...
KEA	Snap-in	1.5	4301.0002	...
KEA	Snap-in	2	4301.0003	...
KEA	Snap-in	2.5	4301.0004	...
KEA	Snap-in	1.5	4301.2042	...
KEA	Snap-in	2	4301.2043	...
KEA	Snap-in	2.5	4301.2044	...
KEA	Screw	-	4301.0521	...
KEA	Screw	-	4301.2021	...
KEA	Screw	-	4301.2141	...
KEA	Screw	-	4301.0021	...
KEA	Screw	-	4301.2061	...
KEA	Screw	-	4301.0501	...
KEA	Screw	-	4301.2001	...
KEA	Screw	-	4301.2121	...
KEA	Screw	-	4301.0001	...
KEA	Screw	-	4301.2041	...
The fuse drawer is not included and must be ordered separately (see required accessory).

Packaging unit

50 Pcs

Table of Variants KEA

Type	Panel mounting	Panel Thickness s [mm]	Fuseholder	Voltage Selector	Internally wired	Order Number	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

KEA	Snap-in	1.5	1-pole	-	•	4301.0522	50
KEA	Snap-in	2	1-pole	-	•	4301.0523	50
KEA	Snap-in	2.5	1-pole	-	•	4301.0524	50
KEA	Snap-in	1.5	1-pole	-		4301.2022	50
KEA	Snap-in	2	1-pole	-		4301.2023	50
KEA	Snap-in	2.5	1-pole	-		4301.2024	50
KEA	Snap-in	1.5	1-pole	2 pos.		4301.2142	50
KEA	Snap-in	2	1-pole	2 pos.		4301.2143	50
KEA	Snap-in	1.5	1-pole	3 pos.	•	4301.0022	50
KEA	Snap-in	2	1-pole	3 pos.	•	4301.0023	50
KEA	Snap-in	2.5	1-pole	3 pos.	•	4301.0024	50
KEA	Snap-in	1.5	1-pole	3/4 digits		4301.2062	50
KEA	Snap-in	2	1-pole	3/4 digits		4301.2063	50
KEA	Snap-in	2.5	1-pole	3/4 digits		4301.2064	50
KEA	Snap-in	1.5	2-pole	-	•	4301.0502	50
KEA	Snap-in	2	2-pole	-	•	4301.0503	50
KEA	Snap-in	2.5	2-pole	-	•	4301.0504	50
KEA	Snap-in	1.5	2-pole	-		4301.2002	50
KEA	Snap-in	2	2-pole	-		4301.2003	50
KEA	Snap-in	2.5	2-pole	-		4301.2004	50
KEA	Snap-in	1.5	2-pole	2 pos.		4301.2122	50
KEA	Snap-in	2	2-pole	2 pos.		4301.2123	50
KEA	Snap-in	2.5	2-pole	2 pos.		4301.2124	50
KEA	Snap-in	1.5	2-pole	3 pos.	•	4301.0002	50
KEA	Snap-in	2	2-pole	3 pos.	•	4301.0003	50
KEA	Snap-in	2.5	2-pole	3 pos.	•	4301.0004	50
KEA	Snap-in	1.5	2-pole	3/4 digits		4301.2042	50
KEA	Snap-in	2	2-pole	3/4 digits		4301.2043	50
KEA	Snap-in	2.5	2-pole	3/4 digits		4301.2044	50
KEA	Screw	-	1-pole	-	•	4301.0521	50
KEA	Screw	-	1-pole	-		4301.2021	50
KEA	Screw	-	1-pole	2 pos.		4301.2141	50
KEA	Screw	-	1-pole	3 pos.	•	4301.0021	50
KEA	Screw	-	1-pole	3/4 digits		4301.2061	50
KEA	Screw	-	2-pole	-	•	4301.0501	50
KEA	Screw	-	2-pole	-		4301.2001	50
KEA	Screw	-	2-pole	2 pos.		4301.2121	50
KEA	Screw	-	2-pole	3 pos.	•	4301.0001	50
KEA	Screw	-	2-pole	3/4 digits		4301.2041	50
The fuse drawer is not included and must be ordered separately (see required accessory).

Packaging unit

50 Pcs

References / Document Downloads

References KEA

Alternative: version with line filter (1)

[Swipe to the left and right for more options]

KFA

Mating Components KEA

Mating Outlets/Connectors (7)

[Swipe to the left and right for more options]

4787

4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I

5091

IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal

4782

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, Cable, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

Mating Outlets/Connectors shuttered (3)

[Swipe to the left and right for more options]

4783

4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

VAC13KS

VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black

VAC17KS

VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white

Accessories KEA

Required Accessory (1)

[Swipe to the left and right for more options]

Fusedrawer 2

Fusedrawer for Fuse Links 5x20 mm, with or without Voltage Selector Insert

Accessories (3)

[Swipe to the left and right for more options]

Wire Harness

Wire harness for SCHURTER products

RC320

Rear Cover for Power Entry Module

Cord retaining kits

Cord retaining strain relief

02.04.2025

Transformation_Date:	2025-04-02 22:27:49
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_GST/DS_PrGrp_WF_GST_PG05_Export/2025_04_02/14_29_59_470_553664/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Power Entry Modules without Line Filter
Typ_Name:	KEA
Typ_AliasNames:	:kea:
Typ_ID:	285
Typ_Hierarchie:	020050160000001107
Typ_EPIM_Order:	310
Typ_Titel:	IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole
PublPrgr_Name:	Power Entry Module without Filter
PublPrgr_Shortcut:	PG05
Variant table:	Variantentabelle V05 (18797)

KEA

Description KEA

Description

Unique Selling Proposition

Characteristics

Other versions on request

Details KEA

Approvals

Product standards

Application standards

Compliances

Dimensions [mm]

Diagrams

Derating Curves

Short Table of Variants KEA Open complete table KEA

References / Document Downloads

References KEA

Alternative: version with line filter (1)

Mating Components KEA

Mating Outlets/Connectors (7)

Mating Outlets/Connectors shuttered (3)

Accessories KEA

Required Accessory (1)

Accessories (3)